Friday, February 18, 2011
Monday, February 7, 2011
Canadian smocking is not as complicated as it appears. Precession is very important.
Satin which is not too shiny is suitable for this. It can also be done on any thick material. If it is done on thin materials embossed effect will not stay long.
Follow the following steps to stitch a cushion of your choice
Measure the size of the cushion.
Decide the size of the squares in the graph.
Select the design.
Calculate the material needed.
Press the material so that there no wrinkles.
Check whether the adjacent sides of the material are perpendicular to one another .If they are not correct them.
Fix the cloth on a table with sticky tapes all around so that wrong side is on the top. Draw graph of squares of your choice. Do not forget to leave borders all around.
I bought 45 cm long and 4 cm wide plastic scales and got them cut along the length into 2 cm, 2.5cm , 3 cm and 3.5 cm wide pieces .
I feel 2 cm x 2 cm graph gives good finish.
Zigzag the edges or else the thread coming out of the edges hinders our work.
Smock the design of your choice column by column.
There will be pleats all around the design. Arrange the pleats in an order according to the design. here I have shown you how pleats can be arranged for different designs Check the size of the smocked piece tack the pleats in place. This takes a little time. Later on these stitches can be removed.
This is front side of the cushion cover. Using matching cloth for the back stitch the cushion cover.